1 thought on “How to set the dog's chest and back traction rope”
Darla
First, how to set the dog's chest and back traction rope 1. Open the hardware buckle and plastic buckle on the dog rope. 2. Open the traction part to horizontal, just like the number 8 placed horizontally. 3. Then you can wear a traction rope for the dog! This two forelimbs of the dog are placed in the hole shown below. 4. Fixed the plastic buckle and hardware buckle respectively in order to fix the dog rope. 5. When the belt worn by a dog is too large or too small, please use the side buckle to adjust. If you adjust the problem, you need to replace it with a new traction rope. . The dog rope is good or the back of the strap from the left: flat leather ring, cylindrical leather item ring, nylon collar, iron chain item ring The design may meet the dog's comfort requirements. When using it, the dog must first put the front leg into two circles and then connect the traction rope to the back. Comfort. Summary 1. Basic principles: Dogs with respiratory diseases must use chest straps. 2. Dog use collar that is large, strong and difficult to control. Because the stress point of the collar is small, when the dog is not obedient, the tightly bound collar will make them feel uncomfortable, and the escapes will slow down. 3. For other types of dogs, you can choose according to the actual situation. . How to make the dog traction rope first prepare a rope with a suitable coarse detail and suitable length, and then cut it into a dog -shaped vest with waste clothes, and then sew it on the neck. It must be elastic! A suitable coarse dog collar appears, and then tie the proper thickness and length ropes and collar to become a traction rope for the back straps. Note that they must be tied to them.
First, how to set the dog's chest and back traction rope 1. Open the hardware buckle and plastic buckle on the dog rope.
2. Open the traction part to horizontal, just like the number 8 placed horizontally.
3. Then you can wear a traction rope for the dog!
This two forelimbs of the dog are placed in the hole shown below.
4. Fixed the plastic buckle and hardware buckle respectively in order to fix the dog rope.
5. When the belt worn by a dog is too large or too small, please use the side buckle to adjust. If you adjust the problem, you need to replace it with a new traction rope.
. The dog rope is good or the back of the strap from the left: flat leather ring, cylindrical leather item ring, nylon collar, iron chain item ring
The design may meet the dog's comfort requirements. When using it, the dog must first put the front leg into two circles and then connect the traction rope to the back. Comfort.
Summary 1. Basic principles: Dogs with respiratory diseases must use chest straps.
2. Dog use collar that is large, strong and difficult to control. Because the stress point of the collar is small, when the dog is not obedient, the tightly bound collar will make them feel uncomfortable, and the escapes will slow down.
3. For other types of dogs, you can choose according to the actual situation.
. How to make the dog traction rope first prepare a rope with a suitable coarse detail and suitable length, and then cut it into a dog -shaped vest with waste clothes, and then sew it on the neck. It must be elastic! A suitable coarse dog collar appears, and then tie the proper thickness and length ropes and collar to become a traction rope for the back straps. Note that they must be tied to them.