Preparation materials: The sponge cloth pad, cloth, loose cloth Specific steps: 1, first cut the cloth of the shoes according to the size of the pet dog's paw. 3, then pad a piece of cloth below the cut sponge cloth. 4, then sew a circle on the cloth on the bottom with a thread. Do not pull too tightly. 5, then tighten the ring head to the cloth to wrap the sponge pad to make the soles of the shoe. 6, then cut a large piece of cloth. 7, fold the two sides of the cloth in turn, and sew on both sides with a needle thread. Do not make the line head too tight. 8. Next, suture the sponge cloth pad and the sixth step of the insole of the insole 9, and seam the black sponge pad. 10. Put the above of the shoe edge. 11, then expand it, fold it in and suture 11, cut off a loose lace, sew it to the middle of the shoes.
Use old socks, make shoe gangs, a pair of socks, change to 4 shoe gangs, just cut it from the middle part, and cut off the suture part of the toes, just right. In the old leather again, cut out 4 soles and bands, like this: This to stitch the round sole with a rectangular strip together, it becomes the soles of the shoe, and half half of the half The shoe looks like the socks, behind the upper end of the shoe gang, the stitch is on the stitch. If there is a pulp zip, sewn it on both sides of the strap, which is much more convenient to use a strap directly. In look, after putting it on, it is still possible, enough to achieve the purpose of not soaring feet.
Pay content for time limit to check for freenAnswer Hello! I am glad that you choose to use Baidu to ask for consultation project! Thank you for your trust in us! Here I join hands with the majority of questions, staff and respondent. Thank you for your sincere thanks! Intersection Intersectionn For the questions you raised, our system has allocated to the most professional respondent for you. In the next 5 minutes, he will answer the questions you raised, because the number of consultations is currently large. a bit. You can check your problems, make up for information, or add instructions for your question.nHello, these are pictures made by puppy shoesnThe production process of dog shoes 1. Materials: sponge pads, cloth, tight. 2. Cut 8 ellipses of the same size according to the size of the dog's feet. 3. Cut off the sponge pad at the soles of the feet to 1cm wider. 4. Use the thread to surround the surrounding circle. It should be noted not to knot. 5. Tighten the thread head to wrap the cloth to cover the sponge pad and fix it at the root. 6. Cut off a piece of cloth. 7. Fold the width in turn and suture both sides. 8. Sponge pads and newly sutured cloth seams. 9. Slim the black sponge pad. 10. Put the upper side of the shoes. 11. Expand it again, fold it in and suture again. 11. Cut off a loose lace and sew it in the middle of the shoes.nI hope my answer will help youn5 morenBleak
First of all, it is necessary to prepare enough and wear -resistant fabrics. Generally speaking, the dog's paw is not too large. Prepare enough cloth according to the size of the dog's paw. Then you need to prepare scissors, rulers, or other decorations. Secondly, the fabric is folded, and the shape of the shoes is drawn on the fabric. Pay attention to measure the size of the dog's feet, and the shape of the dog's front and rear claws may be different, so in the case When making, you must make a body tailor, you can't take it for granted. Third, pay attention to when cutting the cloth, the length of the soles of the shoe in the tailor should be equal to half of the head of the dog's feet, and it should be measured with nails and leave a small amount of balance. The shoes made in this way are in line with the size of the dog's claws. Fourth, then sew the cut cloth to sew it. Note that the wool edges around the shoes should be rolled inward, and then sew. PS: When making shoes for dogs, be sure to pay attention. Choose some more abrasion and cut, so that the shoes made for the dog can make it wear longer and more comfortable.
Try to make one, the effect is not good. Suddenly, I was surprised on Saturday. I wore old socks, made shoe gangs, a pair of socks, and changed to 4 shoe gangs. The suture part is cut off, just right.
In again looking for old leather, cut out 4 soles and bands, like this:
The soles of the shoe,
Sminting with half of the socks, I saw the shoes look like.
Themail at the upper end of the shoe gang, sewing the strap, then it was enough.
If there is a velvet rosewood, sewn it on both sides of the strap, which is much more convenient to use the strap tie straps directly.
In look at it. After putting it on, it is still possible. It is softer than the shoes I bought, which is enough to achieve the purpose of not soaring feet. Ha ha.
Preparation materials:
The sponge cloth pad, cloth, loose cloth
Specific steps:
1, first cut the cloth of the shoes according to the size of the pet dog's paw.
3, then pad a piece of cloth below the cut sponge cloth.
4, then sew a circle on the cloth on the bottom with a thread. Do not pull too tightly.
5, then tighten the ring head to the cloth to wrap the sponge pad to make the soles of the shoe.
6, then cut a large piece of cloth.
7, fold the two sides of the cloth in turn, and sew on both sides with a needle thread. Do not make the line head too tight.
8. Next, suture the sponge cloth pad and the sixth step of the insole of the insole
9, and seam the black sponge pad.
10. Put the above of the shoe edge.
11, then expand it, fold it in and suture
11, cut off a loose lace, sew it to the middle of the shoes.
Use old socks, make shoe gangs, a pair of socks, change to 4 shoe gangs, just cut it from the middle part, and cut off the suture part of the toes, just right.
In the old leather again, cut out 4 soles and bands, like this:
This to stitch the round sole with a rectangular strip together, it becomes the soles of the shoe,
and half half of the half The shoe looks like the socks,
behind the upper end of the shoe gang, the stitch is on the stitch.
If there is a pulp zip, sewn it on both sides of the strap, which is much more convenient to use a strap directly.
In look, after putting it on, it is still possible, enough to achieve the purpose of not soaring feet.
Pay content for time limit to check for freenAnswer Hello! I am glad that you choose to use Baidu to ask for consultation project! Thank you for your trust in us! Here I join hands with the majority of questions, staff and respondent. Thank you for your sincere thanks! Intersection Intersectionn For the questions you raised, our system has allocated to the most professional respondent for you. In the next 5 minutes, he will answer the questions you raised, because the number of consultations is currently large. a bit. You can check your problems, make up for information, or add instructions for your question.nHello, these are pictures made by puppy shoesnThe production process of dog shoes 1. Materials: sponge pads, cloth, tight. 2. Cut 8 ellipses of the same size according to the size of the dog's feet. 3. Cut off the sponge pad at the soles of the feet to 1cm wider. 4. Use the thread to surround the surrounding circle. It should be noted not to knot. 5. Tighten the thread head to wrap the cloth to cover the sponge pad and fix it at the root. 6. Cut off a piece of cloth. 7. Fold the width in turn and suture both sides. 8. Sponge pads and newly sutured cloth seams. 9. Slim the black sponge pad. 10. Put the upper side of the shoes. 11. Expand it again, fold it in and suture again. 11. Cut off a loose lace and sew it in the middle of the shoes.nI hope my answer will help youn5 morenBleak
First of all, it is necessary to prepare enough and wear -resistant fabrics. Generally speaking, the dog's paw is not too large. Prepare enough cloth according to the size of the dog's paw. Then you need to prepare scissors, rulers, or other decorations.
Secondly, the fabric is folded, and the shape of the shoes is drawn on the fabric. Pay attention to measure the size of the dog's feet, and the shape of the dog's front and rear claws may be different, so in the case When making, you must make a body tailor, you can't take it for granted.
Third, pay attention to when cutting the cloth, the length of the soles of the shoe in the tailor should be equal to half of the head of the dog's feet, and it should be measured with nails and leave a small amount of balance. The shoes made in this way are in line with the size of the dog's claws.
Fourth, then sew the cut cloth to sew it. Note that the wool edges around the shoes should be rolled inward, and then sew.
PS: When making shoes for dogs, be sure to pay attention. Choose some more abrasion and cut, so that the shoes made for the dog can make it wear longer and more comfortable.
Try to make one, the effect is not good. Suddenly, I was surprised on Saturday. I wore old socks, made shoe gangs, a pair of socks, and changed to 4 shoe gangs. The suture part is cut off, just right.
In again looking for old leather, cut out 4 soles and bands, like this:
The soles of the shoe,
Sminting with half of the socks, I saw the shoes look like.
Themail at the upper end of the shoe gang, sewing the strap, then it was enough.
If there is a velvet rosewood, sewn it on both sides of the strap, which is much more convenient to use the strap tie straps directly.
In look at it. After putting it on, it is still possible. It is softer than the shoes I bought, which is enough to achieve the purpose of not soaring feet. Ha ha.